amplifier, power, 1.3w 17.7-19.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 1 MAAP-000072-pkg003 rohs compliant features ? 1.3 watt saturated output power level ? variable drain voltage (4-10v) operation ? msag? process description the MAAP-000072-pkg0003 is a 4-stage 1.3 w power am- plifier with on-chip bias networks in a 20 lead mlp package, allowing easy assembly. this product is fully matched to 50 ohms on both the input and output. it can be used as a power amplifier stage or as a driver stage in high power ap- plications. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com?s gaas multifunction self-aligned gate (msag) process. m/a-com?s msag? process features robust silicon-like manufacturing processes, pl anar processing of ion im- planted transistors and multiple implant capability enabling power, low-noise, switch and digital fets on a single chip. the use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging. 1. t b = mmic base temperature 2. adjust v gg between ?2.6 and ?1.2v to achieve specified idq. parameter symbol typical units bandwidth f 17.7-19.7 ghz output power p out 31 dbm 1-db compression point p1db 30 dbm small signal gain g 19 db input vswr vswr 2.0:1 gate current i gg 10 ma drain current i dd 750 ma output vswr vswr 1.6:1 electrical characteristics: t b = 40c 1 , z 0 = 50 , v dd = 8v, i dq = 500ma 2 , p in = 12 dbm, r g = 200 primary applications ? point-to-point radios ? 18 ghz band yyww ap072g xxxx macom yyww ap072g xxxx macom yyww ap072g xxxx macom also available in: description die part number maapgm0072-die die sample board MAAP-000072-smb004 die mechanical sample maap-000071-mch000 packaged sample board MAAP-000072-smb003 (lead free) ceramic package maapgm0072
amplifier, power, 1.3w 17.7-19.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 2 MAAP-000072-pkg003 rohs compliant maximum operating conditions 3 operating instructions this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -2.7 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 8.0 v. 3. adjust v gg to set i dq , (approximately @ ?2.0 v). 4. set rf input. 5. power down sequence in reverse. turn v gg off last. characteristic symbol min typ max unit drain voltage v dd 4.0 8.0 10.0 v gate voltage v gg -2.6 -2.0 -1.2 v input power p in 12.0 14.0 dbm thermal resistance jc 16.4 c/w mmic base temperature t b note 4 c junction temperature t j 150 c recommended operating conditions 4 parameter symbol absolute maximum units input power p in 17.0 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 790 ma junction temperature t j 170 c storage temperature t stg -55 to +150 c quiescent dc power dissipated (no rf) p diss 7.9 w 3. operation beyond these limits may result in permanent damage to the part. 4. mmic base temperature = 170c ? jc * v dd * i dq 5. operation outside of these ranges may reduce product reliability.
amplifier, power, 1.3w 17.7-19.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 3 MAAP-000072-pkg003 rohs compliant figure 2. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. figure 1. 5x5 mm 20-lead mlp. refer to m/a-com application note surface mounting instructions for pqfn packages #s2083 * for assembly guidelines. additional precaution: all parts must receive a bake-out of 125oc for 24 hours prior to any solder reflow operation. *application notes can be found by going to the site search p age of m/a-com?s web page (http://www.macom.com/application%20note s/ index.htm) and searching for the required application note. 100pf 0.1 f v dd 100pf 0.1 f v gg yyww ap072g xxxx macom as close to the package as possible as close to the package as possible 200
amplifier, power, 1.3w 17.7-19.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 4 MAAP-000072-pkg003 rohs compliant figure 3. demonstration board pn MAAP-000072-smb003 (available upon request). yyww apo72g xxxx macom
|
